Best Plasma Cutter

In this post of best plasma cutter you will know about plasma cutter and also detailed about ..

  • plasma cutter machine
  • best plasma cutter under $500
  • plasma cutter reviews comparison chart
  • best plasma cutter under $1000
  • lotos ltp5000d plasma cutter
  • hobart 700i plasma cutter
  • hobart plasma cutters
  • cheap plasma cutter for sale

Top Plasma Cutter review of 2019 -20 is given below. In this post, our team has researched on Plasma Cutter, Considering the budget and quality of best Plasma Cutters. After research, our experts have given a list of 10 best Plasma Cutter for you. And we are sure that through our guide you can purchase the best…

Introduction of  Plasma Cutter

Best plasma cutter

In this article, we are going to discuss different types of plasma cutter like Best plasma cutter under $500, Best plasma cutter under $1000

We have discussed different brands plasma cutter they are Zeny plasma cutter, Miller plasma cutter, Lotos plasma cutter, Hobart plasma cutter, Hyper therm plasma cutter etc all this are a quality brand plasma cutter.

The best plasma cutter should be lightweight, yet powerful, and able to efficiently cut a wide variety of metals and alloys.

If you’re looking for more budget-friendly models, then I will refer you to look for Lotos plasma cutter as it is budget-friendly according to me. 

If you are a smart buyer then have a close eye in our comparison table which will help you to select the plasma cutter according to your choice.

Before using of plasma cutter you should always wear welding helmet. Welding helmet will provide comfort to your eyes.

Editor’s Pick 

This compact plasma cutter has a handle for portability and it uses non-hazardous compressed air which will help you to cut stainless steel, mild steel, alloy steel, aluminum, and copper which make this plasma cutter really great.

Our Recommended

The Suncoo cut50 features a strong heat dissipation that has an overheat voltage protection and over current protection.

Plasma cutter comparison table 2019

Product nameAmpsRating

Lotos LT5000D Plasma Cutter

509.7 
Hobart Airforce 27i279.8

Miller Spectrum 625 X-treme Plasma Cutter

409.6

Ahp alpha cut

609.5
 Ramsond CUT 50DX 509.3
Everlast power plasma 50s509.2

ZENY cut 50 Plasma Cutter

20-509.1 

Longevity ForceCut 42i 40-Amp Plasma Cutter

409.0
Thermal Arc 1-1110-1 Air Cut 15C Plasma System158.8

Mophorn Plasma Cutter 50AMP

508.9

Here we describe the features of  10 Best Plasma Cutter 2019

best plasma cutter 2019

Lotos LT5000D Plasma Cutter Review

Best plasma cutter under $500

Amps – Lotos plasma cutter ltp5000d is a 50 Amp digital inverter air plasma cutter helps in looking at the current amps while the machine is in running position. Lotos LT5000D Plasma Cutter

Warranty – The Lotos Plasma Cutter comes with a standard limited 1-year guarantee. You should pay 2-way shipping for any repairs you require. For the whole machine change, they give just repaired machines in return for the first one you purchased. If you want extra assurance the company sells extended 3-year warranties.

Non-touch Pilot ARC-  The pilot curve is designed to cut through a variety of surfaces from painted to dusty to stippled without breaking a sweat and no slag. You don’t have to touch the tip to the metal with the pilot arc, taking into on side ration higher quality cuts. 

Dual Voltage –   This machine has automatic dual voltage capability that allows the machine to run directly on 220 V 50/60 Hz power or on 110 V 50/60 Hz with the use of a pigtail.  

This compact plasma cutter has a handle for portability and it uses non-hazardous compressed air which will help you to cut stainless steel, mild steel, alloy steel, aluminum, and copper which make this plasma cutter really great.

The optimized design from Lotos Plasma cutter is based on the state of art MOSFET transistors which will help you to provide high power output for cutting any types of thicker metal as well as this plasma cutter will provide you a steady output for cutting any kind of thicker material.

With high-speed precision cuts combined with low cost, air plasma cutter which is suitable for stainless steel, mild steel, alloy steel, aluminum, copper and other metal materials.

The air filter regulator of this plasma cutter will allow you to quickly connect to your air compressor. You can set up this whole machine very quickly within one minute.

You can compare this plasma cutter with oxyhydrogen plasma cutting which will provide you much more safety, quick, low-cost rate and this cutting tool is pretty much easy to use.

Inverter technology- Lotos has brought its inverter technology to provide the latest and greatest high-frequency inverter technology. The cutter uses IGBT to give metal workers and DIYers a steady, reliable, concentrated, and exact current.

The LTP5000D is an excellent choice for home DIY jobs and light duty small business projects.

 

Pros:-

  • Lightweight, portable and compact.
  • Highly durable thanks to its metal construction.
  • Efficient, clean and quicker cuts.
  • Safe and comfortable.
  •  Can cut several types of metals.

Cons:-

  • I have checked thoroughly still I did not find anything.

 Hobart Airforce 27i review

 Our recommended Plasma Cutter

If you are looking for a cutting tool that features some great functionality then I think Hobart Airforce 27i should be your choice.

This Plasma cutter is highly durable and it is pretty much efficient in cutting despite its compact size and its pretty simple design makes this plasma cutter really a special one.

Hobart Airforce 27i plasma cutter is pretty much capable of cutting despite its compact size which makes this cutting tool really a special one.

Amps – It is a 27 amps plasma cutter and it has a digital display that helps in looking at the current amps while the machine is in working position. Hobart Airforce 27i

Great tool for cutting all conductive metals-  Hobart plasma cutter 27i is a great tool with a multi-voltage plug designed for cutting all conductive metals. This plasma cutter helps in cutting metals like Hobart plasma cutter 40i but slightly different from Hobart plasma cutter 250ci.

Its inverter-based design and reliable technology pack a lot of performance into a very portable package. This power source adapts to your work site by operating from either 115 or 230 VAC power through standard household outlet using the Multi-Voltage Plug (MVP). 

 

It has the ability to cut any conductive metal very quickly – The feature of this tool that gives it an edge over other products is its ability to cut any conductive metal very quickly and efficiently like Hobart plasma cutter 700i.

Wind tunnel technology- This plasma cutter has a wind tunnel technology that prevents abrasive dust and particles from damaging internal components.

If you want a quick and appropriate cutting, you can purchase this plasma cutter or model. It will really help you in your work.

 

Pros:-

  • Available in compact design.
  • Green check easy to install and use.
  • Greencheck impressive, efficient clean cuts.
  • Greencheck Highly durable and transportable.
  • Green check Excellent security highlights.

Miller Spectrum 625 X-treme Plasma Cutter Review

The Miller spectrum 625 Xtreme is a model that is specifically made for people who are involved in light construction or you can use this plasma cutter in your own project.

You can find this plasma cutter in a pretty much lightweight design by making this cutting tool highly flexible and a pretty much portable plasma cutter to use.

You can say this plasma cutter as an amazingly versatile and you can use this plasma cutter in a number of different types of work environments.

The lightweight design of this plasma cutter does not provide any kind of effect in providing good performance and functionality.

 Amps-   It is the industry’s most portable and powerful 40-amp plasma.

As this plasma cutter is powerful and portable this plasma cutter will help the buyer in cutting steel material and you can take this plasma cutter from one place to another easily.

Lightweight- One exceptionally shocking part of the Miller plasma cuttMiller Spectrum 625 X-treme Plasma Cutterer 625 is its size and weight. At just 21 pounds, it is a full 16lbs lighter than the Powermax45. This is large because of the inverter innovation used in the 625. In case you’re searching for a unit that is extremely portable then I will refer you to take this plasma cutter as it is a huge plus point for its lighter weight.

Controls and operation are simple- The controls and operation of the 625 X-treme are simple and clear. It comes with the XT-40 handheld light, which has been updated to be more proficient than past models with consumables.

Warranty –  The warranty on the Miller plasma cutter 625 is a limited 3 year like Miller plasma cutter 375.  The torch has a 1 year warranty.

The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue. 

Pros:-

  • Drag cutting technology
  • Inexpensive consumables
  • Incredible support
  • CNC capable

Cons:-

  • Expensive but if you want quality product then you have to pay for it.

Ahp alpha cut Review

Plasma cutter under $1000

Amps – This plasma cutter has a 60 Amps of professional cutting power blow-back start technology. 

Pilot arc creates exceptionally smooth cuts- The continuous pilot arc creates exceptionally smooth cuts. The smoothness implies better productivity too, so you won’t burn through as many combustibles as you would with the Lotos.

Works on rougher metal surface It works on rougher metal surfaces. While a lot of different cutters are intended to work at perfect conditions. This one’s constant curve is rated to work on rusted, corroded, painted and covered metals and coated metals as well as those brand new pieces.

The 110/120 voltage plasma cutter comes with adapter to take machine from 220v to 110v quickly with the snap of a plug.

Provides great customer service – AHP customer service is great . Most purchasers didn’t have any issues, however the few who did said that the company reacted immediately, and that repairs were speedy and smooth.

Warranty:- This aph alpha cut plasma cutter gives 3 years warranty which gives great assurance to the customer who are paying for it.

 

Pros:-

  • Provides three years warranty.
  • Gives great customer service.
  • Works on rougher metals.

 Ramsond CUT 50DX Review

The Ramsond Cut 50DX 50 AMP digital inverter portable air plasma cutter has a dual voltage which makes this plasma cutter a great one and it makes this plasma cutter a perfect one that you are searching for.

The Ramsond Cut 50DX has the updated version of CUT50, CUT50DX models. This unit features dual voltage and high-frequency inverter technology and german made cooling system makes this cutting toll really a great one.

The Ramsond CUT 50DX is equipped with a digital amp display and integrated pressure gauge that is located in the front panel by making this cutting tool really great for cutting all types of metal.

This plasma cutter has been designed in such a way that you can use this metal cutting tool by yourself.

Amps – This is a 4th generation ramsond cut 50DX, a 50 Amps, plasma cutter which has enough power to cut any product.

Warranty-  This plasma cutter gives one years warranty to their buyers which means it gives some assurance to the buyers for their money.

Provides you smooth, clean and uniform cuts – The Ramsond plasma cutter provides you smooth, clean and uniform cuts on a wide range of surfaces and with minimal heat input and without distortion of metal.

The unit uses digital inverter technology and as a result, is very lightweight.  It tips the scales at only 19lbs.

Designed so easily that you can use it by yourself – This model has been designed so it is easy to use by the do-it-yourself user, while fully accommodating the demands of professional operators.

It is only half the size of the Harbor Freight cutter, but is 10 amps stronger and doesn’t overheat nearly as easily.

Pros:-

  • Easy to carry.
  • Fair price.
  • It provides a year’s warranty.

Everlast power plasma 50s Review

Plasma cutter for home use

This everlast power plasma 50s cutter this metal cutting tool is a remarkably inexpensive power cutting tool.

 This small size plasma cutter lends itself well to portable and is a real space saver in the shop or service truck.

If you are looking for a good performer in a light industrial setting then this everlast power plasma cutter is really great. 

It is pretty simple to use and you will surely have fun by using this everlast ower plasma cutter which makes this cutting tool great for home use. 

Amps – Everlast plasma cutter 50s has a professional cutting power plasma cutter. It helps in cutting material or steel products as it is powerful.

Great for cutting both rusty and painted material – This everlast power plasma 50s is great for cutting both rusty and painted metal material of any type of thickness of up to 3/8 inches. 

Easily portable-  The small size lends itself well to portability and is a real space saver in the shop or service truck. So if you do not want to keep this plasma cutter in your business area due to any problem then you can take this plasma cutter from one place to another.

This cutter operates on a dual voltage of 120V/220V and 50 amperages. So you can operate this plasma cutter on dual voltage. 

The machine works very well you will be pretty much happy with the performance of this plasma cutter and it cut the metal pretty well the same as Everlast plasma cutter 80s.

Warranty- This is an everlast plasma cutter that provides a limited period warranty like Everlast plasma cutter 60s. So this plasma cutter really provides durability. 

 

Pros:-

  • Consumables are really cheap and easy to find.
  • Up  to 60s adjustable post flow to keep your torch and consumables running longer.
  • Great for cutting rusty and painted material. 

ZENY cut 50 Plasma Cutter review

Cheap plasma cutter

IF you are looking for the best cheap plasma cutter then you should not go anywhere else as Zeny cut 50 will be your ideal choice.

Zeny plasma arc cutting machine features the latest technology which is perfect for the processing of metal materials machinery.

Zeny plasma cutter is pretty much suitable for a wide range of applications which is included with a sheet metal fabrication, light industrial use, ducting work and for repairing and maintenance service.

Zeny cut 50 cutting tool is not only a suitable machine which is great for business and DIY users but it will fulfill the demands of a professional operator. You can use this cutting tool both for home garages and workshops.

The improved cooling method for the cutting torch greatly makes the cutting consumables and more durable.

Comes with a separate air regulator – The machine comes with a separate air regulator that bolts on to the back of the machine with two bolts but it does not come with an airline that runs from the side of the regulator to the bottom rear corner of the machine. ZENY cut 50 Plasma Cutter

 Amps- Zeny cut 50 plasma cutter gives  20-50 amps which is really powerful and it will help you in cutting.

Cut different sized metals and sheets  If your job requires cutting different size metals sheets you will find it most reliable.  So you can select this plasma cutter to cut different size metals sheets. 

Warranty – Zeny plasma cutter provides one year warranty. So you will get lots of durability for your price which is really great. At this cheap rate, you cannot expect more durability than this.

The new user can also set this plasma cutter – This plasma cutter is very easy to set up if you are a new user then you can also set this plasma cutter by yourself. 

This Ramsond Cut 520DY is another affordable and portable model with a weight of 19 pounds and dimension of 14.2 x 6 x 9 inches.

Pros:-

  • It works
  • Cuts fast and clean
  • Quick set up
  • Decent finish and fit.

Cons:-

  • The button is too small to push. 

Longevity ForceCut 42i Plasma Cutter Review

Are you searching for a professional metal cutting tool on which you can truly depend then I will say that the Longevity force cut 42i cutting tool will be your ideal choice?

The force cut 42i is a professional series plasma cutter that has a dual voltage of 110v/220v with power factor correction which will allow you for operation from 90volts-280volts.

It is a complete cutting tool that you can say in one word that its a great addition both for your home and workshop.

The cost of operation for the Longevity force cut 42i cutting tool is pretty much low with low price consumables.

Its a brand that you can trust – Longevity is a brand that you can trust all the more regularly. Longevity  ForceCut 42i 40-Amp plasma cutter is a decent expert arrangement plasma cutter.

Amps – It is a 40 amps plasma cutter capable of cutting up to 1″  thick Steel on 220v and 3/8″ on 110v. 

Very lightweight and portable –  It is a very lightweight and portable at only 37 lbs and comes with a carrying strap.  So you can easily take this plasma cutter from one place to another as it is lightweight.

Dual voltage adaptor helps to change the voltage – Its dual voltage adaptor helps to change the voltage quickly which makes this tool convenient and easy to use. So you can change this adaptor. 

Warranty :  This plasma cutter provides 5-year warranty, and provide great customer support. So this branded plasma cutter give trustworthy to their customer. 

 Pros:-

  • Amazingly light weight and portable.
  • Ensures efficient and clean cutting.
  • Provides 5 years warranty.

 Thermal Arc Plasma System review

The thermal Dynamics plasma cutter is a pretty much popular brand this cutting tool has an automated and manual cutting applications across the globe.

Whether you are a do it yourselfer  guy or a professional this branded cutting tool will surely satisfy all your needs which makes this cutting tool really a special one.

Thermal Arc has the cutting capacity which is not exceeded that will deliver you the perfect cutting experience.

With this technology, the cutting tool can be used with 120 volts even though it is a 76-volt manual plasma system.

Amps-  This is a 15 amps plasma cutter which helps in cutting metal. It is capable of cutting up to highly strong metal.Best plasma cutter

Lightweight- The weight of this plasma cutter is only 29 pounds, almost 50% lighter than the competition.  So you can easily take this plasma cutter from one place to another as it is easily portable.

Has 25% more cutting power – This plasma cutter has 25% more cutting power provides 25% faster cut speeds than the competition.  So this plasma cutter can cut metal at a very fast speed.

Warranty – This plasma cutter gives a year warranty to their customer which is really great for the money you are paying for this plasma cutter.  

The torch fits nicely in your hand and the trigger is easy to use.  It does everything from automotive to metal artwork. 

New user can also set this plasma cutter – This plasma cutter is very easy to set up if you are a new user then you can also set this plasma cutter by yourself. 

Pros:-

  • Provides one year warranty.
  • Has 25 % more cutting power.

Cons:-

  • Price is bit higher.

Mophorn Plasma Cutter review

Morphon 50 AMP cutting tool is suitable to cut most metals like stainless steel, alloy, mild steel, carbon steel, etc.

The advanced inverter technology of this cutting tool has 85 percent inverter efficiency make this cutting tool really a special one.

The pilot arc technology of this cutting tool allows you to cut metal without touching the tip to the metal.

The overheat pressure, over current and IP21 level protection air regulator at the back which is easy to adjust air pressure.

Amps – The plasma cutter 50amps  cut-50 digital DC inverter 110/220V. 

Cutting Machine is light and its structure is compact Plasma Cutter 50AMP CUT-50 Digital DC Inverter 110/220V Cutting Machine is light and its structure is compact and the electromagnetic fields generated the high current. 

High cutting speed-  This plasma cutter has high cutting speed which really cuts metal at faster speed than the other plasma cutter.

Suitable for cutting stainless steel – Mophorn 50AMP cutting machine is suitable for cutting stainless steel, alloy steel, mild steel, copper and other color metal materials.

The natural wind is not satisfied to cool down components – Mophon plasma Cutter 50AMP natural wind is not satisfy to cool down components, there is two axial-flow fans in inter-machine in order to force to cool down it.

Warranty-  This plasma cutter provides limited period warranty for the buyer.

 

Pros:-

  • High cutting speed.
  • Lightweight. 

SUNCOO Plasma Cutter Review

If you are searching for a perfect metal cutting tool then Suncoo plasma cutter will be your ideal choice.

Suncoo air plasma cutting machine has a new type of thermal high cutting equipment, and its working principle is based on compressed air as working gas.

The strong cutability of heat dissipation which will help you to reduce the temperature of its components and increase of service life.SUNCOO Plasma Cutter Review

The Suncoo cut50 features a strong heat dissipation that has an overheat voltage protection and over current protection.

Suncoo cutting tool maintains a high-temperature high-speed plasma arc as a heat source while melting partial cutting metal make this cutting tool really a special one.

You can choose between 2.5 or 5 seconds in which the air will continue to blow through the torch after you stop cutting.

This cutting tool is pretty much famous and popular on youtube, google you will know more about the assembly, the usage, and the reviews.

Suncoo plasma cutter will offer you limited periods of warranty to the buyers from the date of the original purchase.

Best Plasma Cutter 2020 – Buyer’s guide

Every one of the items investigated above is a great option. To make a good choice, there are a few variables to consider when searching for the best plasma cutter.

If you look at the technology of plasma cutter then you will notice that it is improving year after year through the up-gradation of companies and its machines which adds better performance in cutting and modern days cutting tool has become more easier to use.

If you have more options in your hand while choosing any kind of cutting tool then I am quite sure you will find the task of selecting your favorite cutting tool a lot easier.  

Power Source

The power source through which this plasma cutter runs is the pneumatic and electrical power source. Both this cutting tool is pretty much essential to run any kind of cutting tool.

Electrical 

The electrical output of a cutting tool will help you to consider vital things. If you are looking for a heavy-duty cutter then it should be a 240-volt cutting tool. But if you want a smaller cutting tool then I think 110-120 volt or 220-240 volt cutting tool will be the perfect one for you.

Pneumatic 

Most of the cutting tool has a separate air compressor to remove the air out of the nozzle which will help in working the cutting tool pretty much smoothly. This separated air compressor cutting tool is a benefit for you as it will really make a difference in terms of providing you a good performance. 

What is your electric output requirement?

Plasma Cutter Pigtail When searching for a plasma cutter, the sort of electrical service you have in your workshop or occupation site is a vital factor to consider. Do you have 110v or 220v? Every plasma cutter has its power necessities and a few models can deal with both. Thus, before you pick any model to ensure that the electrical service offered in your shop coordinates the item’s voltage and amperage. Else, you won’t have the capacity to utilize it in your area.

Do you require portability or will it simply be in the shop?

Portability is likewise a vital factor. If you are taking the cutter starting with one work site then onto the next, at that point you need to purchase an item that is adaptable and has highlights, for example, a shoulder lash, handles made for simple carriage, or potentially long cables. However, in the event that you don’t plan to transfer it starting with one place then onto the next, at that point you can neglect these portability features.

What sort of materials will you cut and what thickness?

Every plasma cutter can cut specific types of materials and metals of fluctuating thickness.  There are some that can cut any conductive metal, for example, stainless steel, alloy steel, aluminum or copper however the thickness of the metal they can cut also differs.   You should consider the kind of metal and thickness of metal you will be cutting before you settle on a decision of taking plasma cutter for you. 

What is your budget for best plasma cutter?

Your budget plan is another essential factor to consider. All things considered, it is your well deserved cash and we as a whole know cash doesn’t grow on trees! There is the habit to think that quality cutting machines are costly. Indeed, a great number of them are costly, yet in the event that you look around, you will discover amazing deals on quality items. Also, who doesn’t need a top quality machine at a good or cheap cost?

What Can I Do With My Plasma Cutter?

Plasma cutters are one of the most versatile tools someone can own for metal working. The amount of tasks that you can tackle with a plasma cutter and the amount of time you save will be worth every penny of your investment. It is an essential tool for anyone who wishes to build and repair any type of metal project. Here are some examples of projects that require a plasma cutter…
Cutting metal sections to repair cracked trailer frames using steel plate
Cutting metal to specific lengths (like a band saw)
Cutting steel plate for projects
Mobile car dismantling
Custom BBQ building
Cutting steel to build a welding bench
Building custom fences
Metal sculptures
Removing previously welded attachments on trailers and trucks
Building trailers
Cutting sheet metal to build custom tool boxes
Cutting sheet metal to build custom hydraulic and fuel tanks
Cutting/fitting tubing for custom roll cages
This list is just simply some of the projects I have used my plasma cutter for over the last year. You will find that having this tool in your garage will allow you to do just about anything in the shop with metal. This is why I nick named my main plasma cutter the “Evil Scientist!”

Plasma Cutter 2019-20 – Frequently Asked Questions

What’s the best plasma cutter?
Hobart plasma cutter 27i is the best plasma cutter. 
Who makes the best plasma cutter?
 Ramsond CUT 50DX  makes the best plasma cutter. 
What gas do you use for a plasma cutter?
Argon gas is used for a plasma cutting.
What is the cost of a plasma cutter?
The cost of a plasma cutter is between $500 to $1000.
How hot does a plasma cutter get?
The temperature of the plasma is in excess of 20 000°C and the velocity can approach the speed of sound.
Does a plasma cutter need air?
As compressed air is readily available, and thus plasma cutter does not require fuel gas and compressed oxygen for operation.
Is a plasma cutter hotter than the sun?
Plasma cutter is hotter than the interior of our Sun, which is about 15 million degrees Kelvin, and also hotter than any previous temperature ever achieved on Earth.
Does plasma cutter need gas?
Yes, plasma cutter needs gas. Plasma cutter needs argon gas, oxygen, nitrogen etc.
How much air pressure is needed for a plasma cutter?
55 to 70 psi air pressure is needed for a plasma cutter. 
What can you cut with a plasma cutter?
We can cut steel, stainless steel, aluminum, brass, and copper, although other conductive metals may be cut as well with the help of plasma cutter.
Can a plasma cutter cut wood?
You can cut any thickness from 30 gauge through 1 inch depending on the plasma cutter used.
Can you cut stainless with a plasma cutter?
Yes, you can cut Stainless with the help of a Plasma cutter. 
Can aluminum be cut with a plasma cutter?
Yes, aluminum can be cut with the help of a plasma cutter.
How thick of steel will a plasma cutter cut?
It can usually cut up to 38 mm (1.5 in) thick steel plate, and stronger computer-controlled torches can cut steel up to 150 mm (6 in) thick.
Can you cut titanium with a plasma cutter?
No, you cannot cut titanium with a plasma cutter as cutting titanium is not an easy task. 
What can break titanium?
Titanium metal is brittle when cold and can break apart easily at room temperature.
What is the best plasma cutter under $500?
Lotos LT5000D plasma cutter is best under $500.
Best plasma cutter under $1000?

Ahp alpha cut is the best plasma cutter under $1000. 

What is the best cheap plasma cutter?
Zeny cut 50 is the cheapest plasma cutter. 
How thick can a plasma cutter cut?
Hand-held torches can usually cut up to 38 mm (1.5 in) thick steel plate, and stronger computer-controlled torches can cut steel up to 150 mm (6 in) thick.
Who invented the plasma cutter?
Patent holder invented plasma cutter. 
What is a CNC plasma cutter?
The term “CNC” refers to “Computer Numerical Control”, a machine that means a computer is used to direct the plasma cutter machine’s motion based on numerical codes in a program.

Final Words on the plasma cutter 2020

So here we give the features of the best plasma cutter which will help the buyer to select a quality plasma cutter for their work to solve any purpose. So it’s time to take a decision you should read all the review carefully before buying the plasma cutter for your work. I think you will not find a disadvantage of the plasma cutter.

Unfortunately, some dishonest manufacturers offer plasma cutter reviews comparison chart! Don’t be overwhelmed with their price as those are not quality products! Even sometimes those can’t provide the most accurate result you need.

Better pick one form our list as those are testified by lots of experts and mechanics. You can completely trust on those. Therefore, we also tried to gather the best plasma cutter for the money as well.

However, the choice is yours! Nobody is forcing you to pick one from here. Whatever you pick just pick wisely. That’s all for now. Supremeten is always here to solve all your ten best product related problems. If you have anything on mind feel free to state. More essential product lists are coming soon. Till then:

Stay Safe!

We tried our best to provide you the the list of best plasma cutter.

Best plasma cutter

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.